top of page
Showroom kitchen display with a tall warm wood wall holding a lit wine column and recessed dark wall cabinets, a brown veined stone island and backsplash, and a bronze framed glass cabinet lit along its edges holding stemware in the foreground. Pedini by Daruso, Miami FL.

Inside Our Miami Design District Showroom: A Photographic Guide to Italian Cabinetry

4 days ago
9 min read

By David Rousso Jr., Principal · Pedini by Daruso · November 2026

The short answer: the Pedini by Daruso showroom in the Miami Design District is at 3639 NE 1st Ave, Unit 135, Miami, FL 33137. It is open Monday to Friday from 9am to 6pm, with Saturdays by appointment only, and a design appointment usually takes 45 to 60 minutes. On the floor you can open full size kitchen displays, see lit cabinet interiors and glass units, and handle finishes in the Material Library. Bring your floor plan and your appliance list; the first visit turns them into a brief.

In this article

Showroom kitchen display with a tall warm wood wall holding a lit wine column and recessed dark wall cabinets, a brown veined stone island and backsplash, and a bronze framed glass cabinet lit along its edges holding stemware in the foreground. Pedini by Daruso, Miami FL.
A kitchen display in warm wood, with a lit wine column in the tall wall and a veined stone island, seen past a lit glass cabinet of stemware.

We opened the Design District showroom in May, and the opening is told in a new chapter for Italian kitchen cabinets in Miami. This is the guide we wish every visitor had read before the first appointment: where to go, what is on the floor, what to look at closely, and what to bring so the hour is spent on your room rather than on general questions.

Where is the showroom, and when is it open?

Short answer: at 3639 NE 1st Ave, Unit 135, in the Miami Design District, Miami, FL 33137. Monday to Friday, 9am to 6pm; Saturday by appointment only. Appointments with the design team usually last 45 to 60 minutes, and booking ahead means a designer is free for you when you arrive.

Address

3639 NE 1st Ave, Unit 135, Miami, FL 33137

Phone

(305) 853-9598

Hours

Monday to Friday, 9am to 6pm. Saturday by appointment only.

Appointment length

Usually 45 to 60 minutes

Booking

Through the showroom page or by phone

Parking

The district runs four public garages with contactless payment, including City View Garage on the same avenue at 3800 NE 1st Ave, plus valet stations

Our other showroom

Coral Gables, 250 Altara Ave, (786) 772-6770

The district's visitor page lists all four garages, their hours, and current rates. Book through the showroom page.

What can you see on the showroom floor?

Short answer: full size kitchen displays you can open, cabinet interiors lit the way they would be at home, glass units, and the Material Library of finishes, textures, and grains. The showroom page lists kitchens, closets, bathrooms, and living solutions as categories you can experience in person.

The three photographs below were taken on the floor this autumn. Each one shows a different idea worth seeing at full size.

A wood wall that holds the appliances

The display in the first photograph is built around a tall wall in warm wood. A wine column is set into it, lit from inside, and dark wall cabinets sit in a recess framed by the same wood, so the appliances and storage read as part of one plane rather than as separate boxes. The island and the backsplash are in a brown veined stone, with the stone wrapping down the end of the island. In the foreground, a glass cabinet in a bronze colored frame, lit along its edges, holds stemware. Stand in front of the tall wall and open it: this is where concealed appliances, which we explain in what is a panel ready appliance, either line up or do not.

Showroom kitchen display with light oak framed fronts, a hood and backsplash clad in green veined stone, a waterfall island in the same stone with an open niche holding bowls, a lit fluted glass tall cabinet, and tall units with long vertical pulls. Pedini by Daruso, Miami FL.
Light oak fronts with a framed profile, a hood and backsplash clad in green veined stone, and a waterfall island with an open niche for bowls.

Stone as architecture, and an island that works on two sides

The second display pairs light oak fronts, each with a narrow framed edge, with a green veined stone that covers the backsplash and the hood above it and wraps the end of the island in a waterfall. The island carries an open niche along its length for everyday bowls. At one side, a tall cabinet with fluted glass doors is lit inside; at the other, tall units with long vertical pulls run to the ceiling. This is the display to study if you are deciding how much of a kitchen should be stone and how much cabinetry, and how the two meet at the edges.

Showroom display of a wall unit with five open compartments lined in light wood and lit by vertical strips, holding dark dishes, above a dark veined stone wall and a dark counter with a sink and two stools. Pedini by Daruso, Miami FL.
A wall unit of five open compartments lined in light wood and lit from both sides, above a dark stone wall and a counter with stools.

Light built into the cabinetry

The third display is a wall unit of five open compartments lined in light wood, each lit by vertical strips along its sides, with dark framed shelves and dark dishes. Below it, the wall is a dark veined stone over a counter with a sink and seating. The point of this display is the light: it comes from inside the cabinetry, not from the ceiling, so the dishes are lit and the room stays dim. It is the clearest way to judge whether lit interiors suit you, and the same idea carries into closets, as we explain in what makes a custom closet high quality.

What should you look at in person that a photograph cannot show?

Short answer: the things you judge with your hands and in changing light: how a drawer runs and closes, how even the gaps between doors are, how an edge feels, and how a finish looks under warm and cool light. Five minutes of opening and closing tells you more than any catalogue.

What to check

How to check it on the floor

Why it matters

Drawers

Open a full drawer quickly and let it close on its own

The runner carries everything you own, every day

Reveals

Look along a run of doors from the end

Even gaps across a whole wall are the sign of precise machining

Edges

Run a finger along a door edge and a shelf edge

The edge is where humidity tests a cabinet first

Finishes

Hold a sample under the display lighting and near a window

A finish changes with the light it lives in

Lit interiors

Open a lit cabinet and look at the shelf, not the strip

Good interior light shows the contents and hides the source

Stone joins

Look where the stone turns down the end of an island

The mitre at a waterfall edge shows the quality of the fabrication

The edge is the one people skip, and in South Florida it matters most; we explain why in which cabinet materials hold up in Florida humidity.

“A sample in your hand tells you a color. A full door on its hinges, under the light it will live with, tells you whether you will still like it in ten years. That is what a showroom is for.” — David Rousso Jr., Principal, Pedini by Daruso

What happens in a design consultation?

Short answer: the first meeting is about the room, not a catalogue. We look at your plan or the architect's set, talk through how you will use the space, and walk the floor together so you can react to real finishes and mechanisms. What comes out of it is a brief; plans, elevations, and renderings follow.

The sequence is the same for a kitchen, a closet, or a whole house, as we set out in how to choose a custom closet company:

  1. First visit. Your plan, how the room is used, and a walk of the floor and the Material Library.

  2. Survey and brief. We measure the space or work from the architect's set, then write a brief covering circulation, light, and what the room has to hold.

  3. Drawings. Plans, elevations, and renderings, revised until the room is settled.

  4. Materials. Finishes selected in person, held against each other in the showroom and in daylight.

  5. Manufacture. The specification goes to the Pedini facility in Italy, where the cabinetry is made to the drawings and inspected before it ships.

  6. Installation. Carried out and supervised by our own personnel, closing with a walkthrough where every door and drawer is adjusted, and a ten year warranty on the installation.

Our usual timing is four to six weeks for design and specification and eight to eighteen weeks of production, with installation scheduled to the site; the full sequence is in how a bespoke Italian kitchen is made.

What should you bring?

Short answer: a floor plan with dimensions, photographs of the room, your appliance list if you have one, and any building rules that apply. With those, the first hour becomes a brief rather than a tour.

  1. Floor plan. The architect's set if there is one; otherwise a measured sketch with ceiling height, windows, and doors.

  2. Photographs. Every wall of the room as it is, including outlets, vents, and plumbing.

  3. Appliance list. Brand and model where you know them. Concealed appliances are drawn around the exact model.

  4. What the room has to hold. A rough inventory: small appliances, cookware, the coffee routine, the bar, or for a closet, what hangs and what folds.

  5. Samples you already have. A piece of the floor, the stone, or the paint, to hold against our finishes.

  6. Building rules. For a condominium, the association's alteration requirements; we explain why they come first in planning a condo renovation in Miami.

  7. Timeline. When the site will be ready, so the cabinetry schedule can be set with your contractor.

  8. Other rooms. If a bar, closet, or bathroom might follow, bring those plans too; deciding the finishes once is easier, as the whole home millwork guide explains.

Visiting as an architect or designer

Short answer: bring your client and your set. The showroom page describes trade partnerships for architects and interior designers, with specification reviews, access to the full Material Library, and trade pricing.

For a trade visit, the most useful things to bring are the current drawings, the appliance schedule, the finish schedule as it stands, and the dates the site will be ready for cabinetry. We review the set, flag what the cabinetry needs from the other trades (blocking, service locations, clearances), and return coordination drawings to the project team. Bringing the cabinetry in at design development, rather than after permit, is what keeps those drawings to one round.

Frequently asked questions

Where is the Pedini showroom in the Miami Design District?

At 3639 NE 1st Ave, Unit 135, Miami, FL 33137. The phone number is (305) 853-9598.

What are the showroom hours?

Monday to Friday, 9am to 6pm. Saturday visits are by appointment only.

Do I need an appointment to visit?

Booking ahead is the best way to make sure a designer is free for you, and Saturday visits are by appointment only. Appointments can be booked through the showroom page or by phone.

How long does a showroom appointment take?

Usually 45 to 60 minutes. A first visit covers your plan, how the room will be used, and a walk of the displays and the Material Library.

Where do I park?

The Miami Design District runs four public garages with contactless payment, including City View Garage at 3800 NE 1st Ave, on the same avenue as the showroom, plus valet stations. The district's visitor page lists hours and current rates.

What can I see at the showroom?

Full size kitchen displays you can open, lit cabinet interiors, glass units, and the Material Library of finishes, textures, and grains. The showroom page lists kitchens, closets, bathrooms, and living solutions as categories to experience in person.

What should I bring to a kitchen consultation?

A floor plan with dimensions, photographs of every wall, your appliance list with models if you have it, a rough inventory of what the room must hold, samples of the floor or stone, and any condominium alteration rules.

Can architects and designers bring their clients?

Yes. The showroom offers trade partnerships for architects and interior designers, with specification reviews, access to the full Material Library, and trade pricing.

What happens after the first visit?

We survey the space or work from the architect's set, write a brief, and produce plans, elevations, and renderings. Materials are chosen in person, the cabinetry is made at the Pedini facility in Italy, and our own personnel install it.

How long does a project take after the consultation?

Our usual timing is four to six weeks for design and specification and eight to eighteen weeks of production, with installation scheduled to the site.

Is there another Pedini showroom in Miami?

Yes, in Coral Gables at 250 Altara Ave, (786) 772-6770.

Key takeaways

  • The Design District showroom is at 3639 NE 1st Ave, Unit 135, open weekdays 9am to 6pm, Saturdays by appointment.

  • Appointments usually take 45 to 60 minutes; booking ahead means a designer is free when you arrive.

  • On the floor, judge what photographs cannot show: drawers, reveals, edges, finishes under light, and lit interiors.

  • The first consultation produces a brief; drawings, material selection, manufacture in Italy, and installation by our own team follow.

  • Bring the floor plan, photographs, the appliance list, and any building rules.

Book your visit

Book through the Design District showroom page or call (305) 853-9598. Our Coral Gables showroom at 250 Altara Ave is at (786) 772-6770. Before you come, browse finished rooms on our projects page or our kitchen collections.

About the author. David Rousso Jr. is a Principal at Pedini by Daruso, where he leads kitchen and millwork projects across South Florida from showrooms in the Miami Design District and Coral Gables.

Sources (each checked November 5, 2026):

Last updated November 2026.

Comments


bottom of page